TTR Euroworks India Private Limited

Important Note on Replacement Parts

• Authenticity: When buying a screen module, ensure it's compatible with EDA50K specifically (4-inch, 480x800, capacitive).

• Quality: Cheaper modules may use lower-quality glass or touch layers, which can reduce durability or touch sensitivity.

• Warranty & Repairs: Replacing the screen might void any warranty, depending on how the device is managed.

• Sealing: After replacing the screen, make sure any gaskets or seals are reinstalled properly to keep the device rugged / splash-resistant.

The touch screen replacement for the Motorola Symbol Zebra TC20, TC200J, and TC25 is a 4.3-inch industrial-grade glass digitizer and LCD module. It perfectly restores cracked glass, faulty touch inputs, and dead displays on rugged enterprise PDAs. [1, 2, 3]

The LCD Module for the Motorola Symbol / Zebra TC20, TC200J, and TC25 is a comprehensive replacement assembly. It combines a 4.3-inch LCD display and a capacitive digitizer touch screen into one pre-assembled, drop-in unit. It is specifically designed to replace cracked, unresponsive, or malfunctioning screens on these rugged mobile enterprise computers. [1, 2, 3, 4]

The LCD Module with Touch Screen Replacement is a complete display assembly designed for the Zebra TC51 and Zebra TC56, including TC56DJ variants. This all-in-one unit integrates the LCD display and capacitive touch digitizer to restore full visual performance and touch responsiveness in a single replacement component.

Engineered to original specifications, the module delivers sharp display clarity, accurate touch response, and reliable performance in demanding enterprise environments. It is ideal for repairing devices with cracked screens, display failure, dead pixels, or unresponsive touch functionality.

The Touch Screen with LCD Module Replacement for the Zebra TC52X, TC52AX, and TC57X is a pre-assembled, 5-inch Full HD display digitizer used to repair cracked screens, dead pixels, and unresponsive touch features. This unified assembly eliminates the need to separate glued glass from the inner display. [1, 2, 3, 4, 5]

The LCD module with touch screen replacement for the Zebra Motorola TC53 is a full digitizer assembly designed to repair cracked screens, dead pixels, or unresponsive touch inputs. It restores the device’s 6-inch advanced edge-to-edge display while retaining features like wet-finger and glove touch capabilities.

Restore the display performance of your Honeywell EDA50 mobile computer with this premium LCD with Touch Screen Assembly. This complete replacement unit combines the LCD display and capacitive touch screen digitizer, making it an ideal solution for repairing cracked, damaged, flickering, or unresponsive screens. Designed for a precise fit and reliable performance, it helps return your device to its original display clarity and touch responsiveness.

Restore the full display and touch functionality of your Honeywell EDA50K mobile computer with this complete LCD Module with Touch Screen and Front Cover Assembly. This all-in-one replacement includes the LCD display, capacitive touch digitizer, and front cover frame, making it a convenient solution for repairing heavily damaged or non-functional screens. It is designed for precise compatibility and reliable performance in demanding enterprise environments such as warehousing, logistics, retail, and field service operations.

Restore the display and touch performance of your Honeywell EDA51 mobile computer with this high-quality LCD Module with Touch Screen Digitizer Assembly. This complete replacement unit combines the LCD display and capacitive touch panel, providing a convenient all-in-one solution for repairing cracked, damaged, or non-responsive screens. Designed for precise compatibility, it ensures reliable performance and restores the original clarity and responsiveness of your device.

Restore the display performance of your Honeywell EDA51K mobile computer with this high-quality LCD with Touch Replacement. This replacement assembly is designed to replace cracked, damaged, or unresponsive screens, bringing back clear display quality and smooth touch functionality. Manufactured for precise compatibility, it provides a reliable fit and dependable performance for demanding business environments such as retail, warehousing, logistics, transportation, and field service

Restore the display clarity and touch responsiveness of your Honeywell EDA52 mobile computer with this high-quality LCD with Touch Screen Assembly. This complete replacement unit combines the LCD display and capacitive touch digitizer, making it an ideal solution for repairing cracked, damaged, or non-functional screens. It is designed for precise compatibility and helps ensure reliable performance in demanding enterprise environments.

The LCD Module with Touch Screen Replacement is a premium replacement display assembly designed specifically for the Honeywell ScanPal EDA61K mobile computer. This integrated module combines a high-resolution LCD display with a responsive capacitive touch screen digitizer, providing an ideal solution for repairing devices with cracked screens, display damage, or unresponsive touch functionality. Precision-engineered for accurate fitment and dependable performance, it restores the device's original display quality and touch responsiveness.

The LCD Module with Touch Screen Replacement is a high-quality replacement display assembly designed specifically for the Honeywell ScanPal EDA70 mobile computer. This complete module includes a high-resolution LCD display and a responsive capacitive touch screen digitizer, making it an ideal solution for repairing devices with cracked screens, display issues, or unresponsive touch functionality. Precision-engineered for accurate fitment and reliable performance, it restores the original display clarity and touch responsiveness of the device.

The LCD Module with Touch Screen Replacement is a premium replacement display assembly designed specifically for the Honeywell ScanPal EDA71 mobile computer. This complete module includes a high-resolution LCD display and a responsive capacitive touch screen digitizer, providing an effective solution for repairing devices with cracked screens, display defects, or unresponsive touch functionality. Engineered for precise compatibility and dependable performance, it restores the original display quality and touch responsiveness of your device.

Restore the full display and touch functionality of your Honeywell Dolphin CT60 (Android version) with this NO-OEM Touch Screen with LCD Module Digitizer Assembly. This complete replacement unit includes both the LCD display and capacitive touch digitizer, providing a cost-effective solution for repairing devices with cracked screens, display failure, or unresponsive touch issues. Designed for reliable performance, it helps bring your device back to full working condition in demanding enterprise environments.

The LCD with Touch Replacement for Honeywell MX7 Tecton is a high-quality replacement display assembly designed to restore clear viewing and touchscreen functionality for Honeywell MX7 Tecton rugged mobile computers. This integrated module combines the LCD screen and touch panel, providing accurate touch response and reliable display performance for daily device operation.

Engineered for a precise fit, it is an ideal replacement for cracked, damaged, dim, or unresponsive screens and helps restore the original usability of the device. Built for demanding industrial environments, this replacement LCD with touch assembly supports efficient operation in warehouses, logistics, manufacturing, transportation, and field service applications. It helps extend the service life of Honeywell MX7 Tecton terminals while maintaining dependable performance and user productivity

The Touch Screen Digitizer Replacement for Honeywell LXE MX7 Tecton is a high-quality replacement touchscreen component designed to restore accurate touch functionality on compatible Honeywell LXE MX7 Tecton rugged mobile computers. It provides precise touch response for navigation, data entry, menu selection, and application control, helping users operate the device efficiently in demanding work environments.

Engineered for a precise fit, this replacement digitizer is ideal for repairing cracked, damaged, unresponsive, or inaccurate touch panels. Built for reliable performance, it helps extend the service life of MX7 Tecton terminals used in warehouses, logistics, manufacturing, transportation, retail, and field service applications. This replacement touchscreen digitizer restores smooth operation and maintains the usability of the rugged mobile computer for daily business tasks.

Common Issues That Require Replacement

• Cracked or broken glass / digitizer due to drops.

• Display flickering or dead pixels.

• Touch / digitizer not responding (faulty glass or connector).

• Touch sensitivity degraded or completely nonfunctional.

• Dim or non-uniform brightness.

Installation Tips

• Power off the device and remove the battery before replacing.

• Carefully disengage the old module; note how the zebra strip (if used) is seated — alignment is critical.

• Use correct tools: small screwdrivers, plastic prying tools.

• After installing the new module, test the screen and touch before fully reassembling.

• Make sure the case closes properly and there is no undue pressure on the new glass or flex connectors.

The Back Panel, USB / Serial / Ethernet (Thermal Transfer) for Zebra GK420t / GX420t / GX430t (Part No. 105934-087) is a genuine Zebra rear interface cover assembly that provides all standard wired communication ports for these desktop label printers.

Restore the display performance of your Honeywell EDA50K / EDA50K-1 mobile computer with this high-quality LCD Module with Touch Screen Replacement. This complete display assembly includes the LCD and capacitive touch screen digitizer, providing a convenient solution for replacing cracked, damaged, flickering, or non-responsive screens. Designed for a precise fit and dependable performance, it helps bring your device back to optimal working condition.

Installation & Considerations

• Replacing involves disassembling the handheld: remove housing, detach flex‑cables carefully.

• Use proper tools: opening cases, using a spudger to lift the panel without damaging connector.

• After replacing, test both LCD (for dead pixels) and the touch input to make sure everything works well.

• Make sure the replacement module’s front cover / bezel aligns well, if included; else you may need to reuse the old one.

Limitations / Risks

• Cheap clone / aftermarket screens may have lower brightness / poorer touch sensitivity.

• Replacement may void warranty (if applicable) or risk dust entry if reassembly not done carefully.

• Flex‑cables are delicate — improper handling can damage them.

Considerations for Replacement

• Make sure to get a module compatible with the EDA51 (same size, resolution, touch type).

• When replacing, carefully open the housing, detach the old display’s flex‑cable, and connect the new one.

• Use proper adhesive / gasket when reassembling to maintain IP protection.

• After installation, test both the display (for clarity, brightness, pixels) and touch input (finger, possibly gloved finger) to ensure the new module works properly.

Use‑Cases for Replacement

• Replace when the screen is cracked or broken.

• When touch input is unresponsive (dead zones or non-functioning digitizer).

• If the display has dead pixels or backlight issues / flicker.

• For refurbishing devices — replacing the LCD‑touch module can make old units usable again.

Installation Considerations

• Replacement requires careful disassembly: open the front housing, disconnect the old LCD / digitizer flex or connector.

• Ensure you align the new module properly (connectors, tabs) — misalignment can damage the flex or make the screen sit poorly.

• After replacing, test both display (brightness, pixels) and touch (multi-touch, accuracy).

• Use proper adhesive / seal (if any) to maintain ruggedness and sealing.

Installation Considerations

• Replacement requires careful disassembly: you’ll need to open the housing, remove the old screen module, and attach the new one.

• Ensure proper connector alignment (flex cables / ribbon) when fitting the new module.

• After installing, you must test both the touch functionality (finger / stylus / glove) and display quality (color, brightness, pixels).

• Use correct adhesive or mounting to keep the screen firmly in place and maintain device ruggedness.

Environmental / Durability

• The TC5X series (which includes TC52X and TC57X) is designed for rugged use: able to survive impact, and built with a unibody design for better strength. Zebra Technologies

• Operating conditions: The devices are rated for similar temperature and ruggedness specs as earlier TC5-series devices. Cobalt Systems

• Sealing / ingress: Given the device’s rugged class, the screen assembly replacement must properly maintain the sealing / correct gasket / adhesive alignment to preserve device protection.

The Reset Switch Replacement for Intermec CK3R / CK3X is a high-quality replacement component designed to restore proper reset functionality on compatible Intermec CK3R and CK3X rugged mobile computers. This internal switch provides reliable user input for device reset operations, helping maintain smooth system recovery and device control.

Engineered for a precise fit, it replaces damaged, worn, or non-responsive reset switches and supports efficient repair and maintenance of Intermec CK3R and CK3X terminals. Built for dependable performance in demanding environments, this replacement switch helps reduce device downtime and extends the service life of mobile computers used in warehouses, logistics, manufacturing, retail, and field service applications.

The Camera Lens Replacement for Intermec CK70 is a replacement protective lens component designed to restore the camera functionality and appearance of the Intermec CK70 rugged mobile computer. It protects the integrated camera module from scratches, dust, and damage while helping maintain clear image capture performance.

The Motherboard Replacement for Symbol LS3408 Series is a replacement main circuit board designed to restore the internal functionality of Symbol LS3408 industrial barcode scanners. It serves as the scanner’s central electronic control unit, managing scanning operations, power distribution, signal processing, and communication with connected host systems

The Screen Protector for Intermec CK3R and CK3X mobile computers is a protective accessory designed to shield the device’s touchscreen display from scratches, dust, fingerprints, and everyday wear. It helps maintain screen clarity, touch sensitivity, and durability in demanding industrial environments.

The LCD Display Panel with Digitizer Touch Screen and Front Cover Replacement is a complete display assembly designed for the Zebra TC70 and Zebra TC75. This all-in-one unit integrates the LCD display, touch digitizer, and front housing frame to restore full visual output and touch functionality in a single replacement solution.

Engineered to original specifications, the assembly delivers clear display quality, accurate touch response, and a precise fit within the device chassis. It is ideal for repairing devices with cracked screens, unresponsive touch panels, display distortion, or damaged front covers, ensuring fast restoration of operational performance.

Built for rugged enterprise environments, this replacement supports reliable use in warehousing, logistics, field service, retail, and industrial applications where device uptime and durability are critical.

The Zebra P1080383-442 is a genuine Ethernet module upgrade kit designed to add wired network connectivity to ZD411 series thermal desktop printers (and compatible ZD410/ZD420/ZD611 models). This, available on , allows for easy installation into the printer's rear expansion slot, facilitating efficient network sharing.

Installation / Replacement

• Requires opening the front housing of the device. Care is needed when removing the old digitizer: flex cables are delicate.

• Cleaning: Before applying the new digitizer, ensure the frame is clean of dust / debris; even small particles can prevent proper adhesion or damage the cable.

• After fitting, test: make sure the device recognizes touch input correctly (stylus / finger) in all areas.

• Use appropriate adhesive: Since the part is designed for adhesive mounting, use the right glue / double‑sided tape recommended for digitizer replacements to avoid loosening later.

The digitizer touch screen for the Motorola/Symbol MC55, MC55A0, and MC55N0 rugged mobile computers is a 3.5-inch 4-wire resistive touch panel designed for harsh enterprise environments.

The Finger Strap (A Version) for Motorola Symbol RS6000 / RS60B0 is a replacement wearable strap accessory designed to securely hold the RS6000 ring scanner on the user’s finger. It ensures stable positioning of the device during barcode scanning operations, allowing hands-free productivity in warehouse, logistics, and retail environments.

This strap is an essential wearable component of the RS6000 ecosystem, providing comfort, adjustability, and secure mounting for extended shift usage.